How to Use the Pentart Transparent Cracking Gel

Pentart Transparent Cracking Gel

You can download the Transparent Cracking Gel Playbook Page Here:

You can purchase the Transparent Cracking Gel here:

How to Use the Pentart Transparent Cracking Gel

What it is

A water-based, two-component system for creating a transparent, three-dimensional cracked textures. It dries clear and a layer above your project so you can see what design you have under the transparent cracking gel.

How to use it

1. Apply Component 1 in an even, thin coat using a clean, dry brush. Goes on white.
2. Allow it to dry fully until it appears transparent.
3. Spread Component 2 evenly over the first layer—use a brush, sponge, palette knife or apply through a stencil .
4. You can apply thick for deep cracks or thin for smaller cracks.
5. Allow the gel to air-dry naturally or you can use a heat gun moved continuously to avoid heat damage .
6. Once cracks have formed, rub in antique gel, patina, or pigments to highlight the cracks.

When to use it

To create a vintage, distressed look without hiding your project underneath.

Pro Tips

• Mix with pigments to get different colors.
• The thicker the layer, the bigger and deeper cracks.
• Allow Component 1 to throughly dry before applying Component 2 or you will see
• clouding in your cracks.
• Vary the thickness of Component 2 for a more natural look.

For more inspiration, be sure to join my facebook group: Shannon's Makers and Creators.